Home > Products > Dental Lab Furnace > Soft Metal Sintering Furnace > Soft Metal Sintering Furnace

  • Soft Metal Sintering Furnace
  • Soft Metal Sintering Furnace
Soft Metal Sintering FurnaceSoft Metal Sintering Furnace

Soft Metal Sintering Furnace

Soft Metal Sintering Furnace

Description:

This CoCr Metal Sintering Furnace is special designed for CoCr blank's lab sintering furnae system is composed by special designed crucible,and gas insert system with special design sintering chamber.All of the sintering curve is controlled by programmable. 1,PID control,30 steps programmable curve can pre-store 2,LCD touch panel controller,easy for operate 3,Double layer structure,keep furnace in low temperature 4,large chamber dimension,allow user sintering two pieces blank 5,Utra silent screw rod elevator,lift up/down no noise 6,New software control,compared with other supplier,sintering time can be reduce two hours,to achieve real fast sintering


Date Sheet:

Model

LDSM-1400BT

Voltage    and Frequency

AC110/220V 50/60HZ

Internal size

Dia:120mm*Height:110mm

Power

2kw

Heating Rate

0-20C/min

Heating Element

High Purity SIC

Thermocouple

S type

Temperature Alarm

1,Over temp alram

2,Broken thermocouple alarm

Furnace Shell

Double Shell sctructure with fans cooling system eusure the temperature of furnace surface is below 40.c

Furnace Chamber

Chamber material is light alumina ceramic fiber, reasonable design, heat preservation performance is good, saving energy.

Temperature control

1,PID automatic control with 30 segment programable via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor.

2, Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.

Sealing Method

Lifting Tray

Inlet/Outlet Gas

Two Way

Packing Weight

90kg

Packing Size

630*460*1060mm


Please Order Now!



Scan the qr codeClose
the qr code